GENIE 105692GT limit switch with lateral roller arm actuator, 16mm plastic roller, 1NO/1NC contacts, 1.5A rating and 2000mm wire connection. Reliable industrial replacement part.
Type of actuator:Roller arm
Position of the actuator:Lateral
Position of the roller:Standard
Diameter roller:16 mm
Length of the wire:2000 mm
Number of mounting holes:2
Shortest center distance between mounting holes:20.0 mm
Current:1.5 A
Type of the connection:Wire
Number of limit switches:1
Number of normal open contacts (NO):1
Number of normal closed contacts (NC):1
Material of the roller:Plastic
1.What type of actuator does the GENIE 105692GT use?
It uses a lateral roller arm actuator with a standard 16 mm plastic roller.
2 What is the current rating of this limit switch?
The GENIE 105692GT is rated for 1.5 A.
3. Does this limit switch have both NO and NC contacts?
Yes, it features 1 Normally Open (NO) and 1 Normally Closed (NC) contact.
4. How long is the connection wire?
The integrated wire length is 2000 mm.
5. What is the mounting hole spacing?
The shortest center distance between mounting holes is 20.0 mm.
Compatible Models
The 105692GT Limit Switch is an original replacement part used in various scissor lift models manufactured by Genie. This switch is commonly installed in the GS series electric scissor lifts for position detection and safety control functions.
Compatible Genie GS Scissor Lift Models:
GS-1530
GS-1532
GS-1930
GS-1932
GS-2032
GS-2046
GS-2632
GS-2646
GS-3232
GS-3246
Important Compatibility Note
Fitment may vary depending on the machine’s production year and serial number range. Always verify your equipment serial number against the official parts manual before ordering to ensure correct compatibility.
GENIE 105692GT limit switch with lateral roller arm actuator, 16mm plastic roller, 1NO/1NC contacts, 1.5A rating and 2000mm wire connection. Reliable industrial replacement part.
Type of actuator:Roller arm
Position of the actuator:Lateral
Position of the roller:Standard
Diameter roller:16 mm
Length of the wire:2000 mm
Number of mounting holes:2
Shortest center distance between mounting holes:20.0 mm
Current:1.5 A
Type of the connection:Wire
Number of limit switches:1
Number of normal open contacts (NO):1
Number of normal closed contacts (NC):1
Material of the roller:Plastic
1.What type of actuator does the GENIE 105692GT use?
It uses a lateral roller arm actuator with a standard 16 mm plastic roller.
2 What is the current rating of this limit switch?
The GENIE 105692GT is rated for 1.5 A.
3. Does this limit switch have both NO and NC contacts?
Yes, it features 1 Normally Open (NO) and 1 Normally Closed (NC) contact.
4. How long is the connection wire?
The integrated wire length is 2000 mm.
5. What is the mounting hole spacing?
The shortest center distance between mounting holes is 20.0 mm.
Compatible Models
The 105692GT Limit Switch is an original replacement part used in various scissor lift models manufactured by Genie. This switch is commonly installed in the GS series electric scissor lifts for position detection and safety control functions.
Compatible Genie GS Scissor Lift Models:
GS-1530
GS-1532
GS-1930
GS-1932
GS-2032
GS-2046
GS-2632
GS-2646
GS-3232
GS-3246
Important Compatibility Note
Fitment may vary depending on the machine’s production year and serial number range. Always verify your equipment serial number against the official parts manual before ordering to ensure correct compatibility.